Removing and installing front door control module - AR72.29-P-1000K

MODEL 208 

Fig 1: Identifying Front Driver Control Module Remove/Install Components

	Removal, installation
1	Remove door liner (1)		AR72.10-P-1000K
2	Release and disconnect electrical connectors on front driver-side door control module (N69/1) or front passenger-side door control module (N69/2)	Use aid for connecting and disconnecting electrical connectors if necessary
3	Press plastic pins together on front driver-side door control module (N69/1) or front passenger-side door control module (N69/2) at top and bottom (arrows)
4	Remove front driver-side door control module (N69/1) or front passenger-side door control module (N69/2)	Installation:  Insert retaining lugs on front of door control module into inner door panel
5	Reinstall in opposite order
6	Adjust side windows	See operating instructions