Removing and installing soft top open/closed switch group - AR77.39-P-3680KA

MODEL 208.435 /444 /445 /447 /448 /465 /470 

Fig 1: Identifying Soft Top Open/Closed Switch Group Remove/Install Components

	Removal, installation
	Injury hazard from rollover bar extending	Extend rollover bar before working in the rollover bar area	AS91.00-Z-0003-01KA
1	Completely open soft top	Leave soft top compartment cover upright
2	Remove left side paneling in rear		AR68.30-P-4780KA
3	Disconnect electrical connector in area of rear side paneling	Loosen cable strap along electrical lead
4	Release soft top open/closed switch group (S84/13) from soft top frame and remove upward	Catch lugs can break easily
5	Install in the reverse order