Removing and installing remote trunk release switch - AR88.50-P-5045F
MODEL 202 (except 202.07 /08 /18) as of 1.6.97, 208, 210 (except 210.2) as of 1.3.97
| Removal, installation | |||
| 1 | Remove rear lock (1) | Model 202 | AR88.50-P-5020E |
| Model 208 | AR88.50-P-5020K | ||
| Model210 | AR88.50-P-5020F | ||
| 2 | Unclip electrical connector from remote trunk release switch (S15/1) | ||
| 3 | Press catch in direction of arrow with small screwdriver | ||
| 4 | Pull remote trunk release switch (S15/1) out of guide | ||
| 5 | Reinstall in opposite order |