Body, Celette-straightening set - AR60.10-P-1070E

MODEL 202.0 /1, 208.3 /4

Fig 1: Identifying Body, Celette-Straightening Set (1 Of 2)

Fig 2: Identifying Body, Celette-Straightening Set (2 Of 2)

Pay attention to the arrangement drawings enclosed with the straightening tool set.

The positions illustrated in the figures are given in the set-up plans.

Fig 3: Identifying Trunk Straightening Tool Set (1 Of 2)

Shorten check and locating plug (58) approx. 50 mm on knurled side for model 208.4

Fig 4: Identifying Trunk Straightening Tool Set (2 Of 2)

Pay attention to the arrangement drawings enclosed with the straightening angle set.

The positions not illustrated in the figures are given in the set-up plans.

Work instructions
Observe set-up plans included with straightening set.
Set up Celette straightening bracket set	Model 202.026/029/033/086/089/093 and Model 208.365/370/ 465/470 Also use supplementary straightening set for engines 112, 113! See ↓	AR60.10-P-1100-01A
	Models 202, 208 with engines 112, 113 Celette supplemental straightening bracket set	*WE58.40-Z-1012-01A
	Model 208 Celette supplemental straightening bracket set	*WE58.40-Z-1006-01A
	Celette straightening bracket set models 208.4 Use additional supplementary straightening set on model 208.4! See ↓	*WE58.40-Z-1009-01E
	models 208.4 Celette supplemental straightening bracket set	*WE58.40-Z-1015-01A
	Tensioning chain on mount for longitudinal member	*BA60.10-P-1001-01A

CELETTE STRAIGHTENING SET 7202.300

Number	Designation		models 202.0/1	models 208.3/4
BA60.10-P-1001-01A	Tensioning chain on mount for longitudinal member	Nm	50	50

COMMERCIALLY AVAILABLE TOOLS

Number	Designation
WH58.30-Z-1007-06A	Reversible ratchet
WH58.30-Z-1026-06A	Screwdriver bit, 8 mm for hexagon socket head screws
WH58.30-Z-1002-11A	Double end box wrench, offset, 22 x 24 mm

WORKSHOP EQUIPMENT

WE58.40-Z-1006-01A	Celette straightening bracket set 7208.309 (model C 208), as supplement to 7202.300 (model 202)
WE58.40-Z-1012-01A	Celette straightening bracket set 7202.309 (model 202, 208 with engine 112, 113), as supplement to 7202.300 (model 202)
WE58.40-Z-1015-01A	Celette straightening bracket set 7208.308 (model A 208), as supplement to 7202.300 (model 202), as well as 7208.309 (model C 208)
WE58.40-Z-1001-01E	Celette straightening bench
WE58.40-Z-1007-01E	Celette module crossmember set 955.940
WE58.40-Z-1008-01E	Celette additional member 955.908
WE58.40-Z-1009-01E	Celette straightening bracket set 7202.300
WE58.40-Z-1008-03A	Pneumatic ratchet