Removing and installing switch module for power window switches - AR72.29-P-0120N

MODEL 215 

Fig 1: Identifying Power Window Switches Switch Module Remove/Install Components (1 Of 2)

Fig 2: Identifying Power Window Switches Switch Module Remove/Install Components (2 Of 2)

	Removal, installation
1	Remove door liner (2) on front door		AR72.10-P-1000N
2	Remove spring washers (4), unscrew screws (5) and remove door liner bottom section (5) from door liner (2)
3	Unhook switch group cover (1) with driver-side power window switch group (S20/1) from door liner bottom section (3)	Do not damage clamping bracket (6)
4	Remove switch group cover (1) from driver-side power window switch group (S20/1)	For this purpose press retaining lugs (arrow) on driver-side power window switch group (S20/1) together with suitable tool until driver-side power window switch group (S20/1) can be removed from the switch group cover (5) toward inside. Driver-side power window switch group (S20/1) can only be replaced completely.
5	Install in opposite order
6	Check for proper function