Retrofit dynamic guidance for APS - AN82.61-P-0002J
MODEL 215.### 1A up to 001434 with CODE (352a) COMAND operating and display system
System illustration
| Notes on dynamic guidance for APS | AH82.61-P-0001-04C | ||
| Removal | |||
| 1 | Connect quiescent current retention unit | *WH58.30-Z-1012-09A | |
| 2 | Disconnect ground cable of battery | ||
| AR54.10-P-0003I | |||
| 3 | Remove cover from center console | ||
| AR68.20-P-2350N | |||
| 4 | Remove foot support in passenger footwell | ||
| Install | |||
| 5 | Install dynamic guidance wiring harness | AN82.61-P-0001-01M | |
| 6 | Retrofit traffic data memory | AN82.61-P-1000-04M | |
| 7 | Reassemble vehicle 4 to 1 | ||
| 8 | Start up and check for proper function |
COMMERCIALLY AVAILABLE TOOLS
| Number | Designation |
|---|---|
| WH58.30-Z-1012-09A | Quiescent current retention unit |
PARTS ORDERING NOTES
| Part no. | Designation | Quantity |
|---|---|---|
| KG82 (see EPC) | Control module (GSM/RDS-TMC), Telematic | 1 |
| A210 540 73 34 | Telematic wiring harness | 1 |