Detach/mount pressure supply valve unit - AR32.50-P-0003-01M

ACTIVE BODY CONTROL SUSPENSION

Number	Designation		Model 220
BA32.50-P-1019-01A	Bolt, shield of pressure supply valve unit to front axle carrier	Nm	20

Unplug electrical connector from ABC pressure sensor (B4/5).
Unscrew bolts (1) and remove pressure supply valve unit (52) with shield (3) from front axle carrier (4).
Do not stretch or kink pressure lines.
Assemble in the reverse order.
Shown on model 220.028

Fig 1: Identifying ABC Pressure Sensor, Pressure Supply Valve Unit And Bolts (Shown On Model 220.028)