LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2001 >> CL500 >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Axle -- Testing & Repair -- 215 & 220 Chassis >> Testing & Repair >> Testing and repair work: Passenger cars: Front axle - AR33.00-Z-9220AA

Testing and repair work: Passenger cars: Front axle - AR33.00-Z-9220AA

MODEL 220 

  Remove/install front axle carrier MODEL 220 AR33.10-P-0001M 
  Remove/install front axle MODEL 220 ... AR33.10-P-0100I 
  Remove/install front axle MODEL 220.08/ 18 AR33.10-P-0100IW 
  Remove/install front axle MODEL 220 with CODE (979) Special protection version with CODE (Z07) Top protection AR33.10-P-0100MB 
  Remove/install front axle MODEL 215 MODEL 220 with CODE (487)
Active Body Control (ABC) MODEL 230
AR33.10-P-0100N 
  Lower front axle MODEL 220 (except 220.08 /18) AR33.10-P-0101M 
  Attach engine lifting device MODELS 220.028 /128 with ENGINE 628.960 AR33.10-P-0105M
  Removing and installing front axle half MODEL 220 ... AR33.10-P-0200I 
  Remove/install front axle half MODEL 220.08 /18 AR33.10-P-0200IW 
  Remove/install front axle half MODEL 220 with CODE (979) Special protection version with CODE (Z07) Top protection AR33.10-P-0200MB 
  Remove/install front axle half MODEL 220.8 AR33.10-P-0200MP
  Remove/install front axle half MODEL 215, 230 MODEL 220 with CODE (487) Active Body Control (ABC) AR33.10-P-0200N 
  Remove/install torque strut at front axle MODEL 215, 220 ... AR33.15-P-0160I 
  Remove/install torque strut at front axle MODEL 220 with CODE (979) Special protection version with CODE (Z07) Top protection AR33.15-P-0160MB 
  Remove/install torque strut at front axle MODEL 220.8 AR33.15-P-0160MP
  Remove/install spring control arm on front axle MODEL 215, 220 ... AR33.15-P-0170I 
  Remove/install spring link on front axle MODEL 220 with CODE (979) Special protection version with CODE (Z07) Top protection AR33.15-P-0170MB 
  Remove/install spring control arm on front axle MODEL 220.8 AR33.15-P-0170MP
  Adjust wheel bearing play MODEL 140, 170, 171, 202, 203, 208, 209, 210, 215, 220 ... AR33.20-P-0300A 
  Remove/install front wheel hub MODEL 211 (except 211.08 /09 /28 /29)
MODEL 215 MODEL 220 (except 220.08 /18)
MODEL 230
AR33.20-P-0310I 
  Remove/install front axle shaft flange and double-row angular ball bearing MODEL 203.08 /09 /28 /29, 211.08 /09 /28 /29, 220.08 /18 AR33.20-P-0315I 
  Checking supporting joint and follower joint of steering knuckle mount (removed) MODEL 211, 215, 220, 230 AR33.20-P-0425I 
  Checking supporting joint and follower joint of steering knuckle mount (removed) MODEL 220.083 /084 /087 /183 /184 /187 AR33.20-P-0425IW 
  Checking follower joint of steering knuckle mount (installed) MODEL 211 (except 211.08 /09 /28 /29)
MODEL 215, 220, 230
AR33.20-P-0426I 
  Check front axle supporting joints MODEL 170, 202, 208, 210, 211, 220 ... AR33.20-P-0429F 
  Replace supporting joint MODEL 215, 220 ... AR33.20-P-0440I 
  Replace supporting joint MODELS 220.083 /084 /087 /183 /184 /187
MODELS 211.08 /28 /09 /29
AR33.20-P-0440IW 
  Replace supporting joint MODEL 220 with CODE (979) Special protection version with CODE (Z07) Top protection AR33.20-P-0440MB 
  Replace supporting joint MODEL 220.8 AR33.20-P-0440MP
  Remove/install upper wishbone MODEL 215, 220 AR33.20-P-0500I 
  Remove/install lower wishbone MODEL 220.083 /084 /087 /183 /184 /187 AR33.20-P-0510IW 
  Replace front bearing of lower control arm MODEL 210.08 /28, 211.08 /09 /28 /29, 220.08 /18 AR33.20-P-0526D
  Replace rear bearing of lower control arm MODEL 210.08 /28, 211.08 /09 /28 /29, 220.08 /18 AR33.20-P-0527D
  Removing and installing steering knuckle MODEL 215, 220, 230 ... AR33.25-P-0400I 
  Remove/install steering knuckle MODEL 220.08 /18 AR33.25-P-0400IW 
  Remove/install steering knuckle MODEL 220 with CODE (979) Special protection version with CODE (Z07) Top protection AR33.25-P-0400MB 
  Remove/install steering knuckle MODEL 220.8 AR33.25-P-0400MP
  Remove/install front axle gear MODEL 220.083 /084 /087 /183 /184 /187 AR33.30-P-0525I 
  Replace shaft seal on drive pinion MODEL 203.08 / 09 / 28 / 29 MODEL 211.08 / 09 / 28 / 29 MODEL 220.08/ 18 AR33.30-P-0530P 
  Install new radial sealing ring on outside right of front axle gear MODEL 203.081 /084 /087 /092 /281 /284 /287 /292 MODEL 220.083 /084 /087 /183 /184 /187 AR33.30-P-0540P 
  Replace left inner radial seal at front axle gear MODEL 203.08 / 09 / 28 / 29 MODEL 211.08 / 09 / 28 / 29 MODEL 220.08/ 18 AR33.30-P-0541P 
  Remove/install front axle shafts MODEL 220.08 /18, 211.08 /28 /09 /29 AR33.30-P-0620I 
  Remove/install intermediate shaft and replacing deep-groove ball bearing MODEL 203.08 /09 /28 /29 MODEL 211.08 /09 /28 /29 MODEL 220.08/ 18 AR33.30-P-0625P 
  Remove/install boots on front axle shaft MODEL 203.08 /28, 211.08 /09 /28 /29, 220.08 /18, 221.08 /18 AR33.30-P-0690T