LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2001 >> CL500 >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seats, Restraint Systems -- Testing & Repair -- 215 & 220 Chassis >> Testing & Repair >> Removing and installing pneumatic lines - AR91.25-P-1560-01N

Removing and installing pneumatic lines - AR91.25-P-1560-01N

  1. Remove pneumatic line (1) from connector (2) for pressure supply reservoir (3).
  2. Pull pneumatic line (1) through cable duct passage (see arrow).

    IMPORTANT Remove cable strap from pneumatic line.

  3. Remove pneumatic line (1) from T-fitting (4)
  4. Reinstall in opposite order
  5. Check for proper function and check pneumatic lines for leakage.
    Fig 1: Identifying Pneumatic Lines Remove/Install Components
    G04851783
scientia non olet · About LEMON Manuals