Removing and installing control cables for front seat backrest release - AR91.10-P-1470N
MODEL 215
Fig 1: Identifying Control Cables For Front Seat Backrest Release Remove/Install Components - Model 215
| Removal, installation | |||
| 1 | Remove backrest cover | AR91.18-P-1820N | |
| 2 | Unscrew screw (4) | ||
| 3 | Unscrew screws (5) | ||
| 4 | Press out retainer (6) in direction of arrow and unhook control cable (1) from lever (7) | ||
| 5 | Press out control cable (1) at top of backrest release mount (3) | ||
| 6 | Remove control cable (1) from backrest frame (2) | ||
| 7 | Install in opposite order | Adjust control cable (1) | AR91.10-P-1471N |