Remove/install rear seat adjustment motor - AR91.29-P-1440MA

MODELS 220.0 /1 with CODE (224c) Electrically adjustable rear single seats, with seat ventilation, seat heater and memory package 

Fig 1: Identifying Rear Seat Adjustment Motor Remove/Install Components - Models 220.0 /1

	Remove/Install
1	Remove seat adjustment device on rear seat		AR91.12-P-1520M
2.1	Remove electrical connector from rear seat adjustment forward/back motor (M18/1m1, M18/2m1)	Only if replacing rear seat adjustment forward/back motor (M18/1m1, M18/2m1).
3.1	Unscrew bolt (1, 2 pcs.) from rear seat adjustment forward/back motor (M18/1m1, M18/2m1) and remove motor	Internal torx set Only if replacing rear seat adjustment forward/back motor (M18/1m1, M18/2m1).	Figure
		Bolt of seat adjustment motor	*BA91.29-P-1001-01A
4.1	Remove electrical connector from rear seat cushion angle adjustment up/down motor (M18/1m2, M18/2m2)	Only if replacing rear seat cushion angle adjustment up/down motor (M18/1m2, M18/2m2).
5.1	Unscrew bolt (1, 2 pcs.) from rear seat cushion angle adjustment up/down motor M18/1m2, M18/2m2) and remove motor	Internal torx set Only if replacing rear seat cushion angle adjustment up/down motor (M18/1m2, M18/2m2).	Figure
		Bolt of seat adjustment motor	*BA91.29-P-1001-01A
6	Install in the reverse order
7	Perform function check on electric seat adjustment

SEAT ADJUSTMENT

Fig 2: Identifying Torx Bit Set (000 589 01 10 00)