Removing and installing right center vent blend flap actuator motor - AR83.30-P-2060M

MODEL 215, 220 

Fig 1: Identifying Right Center Vent Blend Flap Actuator Motor Remove/Install Components

Courtesy of MERCEDES-BENZ USA

REVISIONS

14.10.98

Synchronization of actuator motors

Step 11, newly included

	Removal, installation
1	Remove A/C housing		AR83.30-P-5200M
2	Unscrew screws (3)
3	Disconnect actuator motor connectors (8), unclip wiring harness	Connection and disconnection aid
4	Unclip clips (4)
5	Pull off 2 clips (5)
6	Separate air distribution housing (1) from blower housing (2)
7	Disconnect actuator motor connector (7)	Connection and disconnection aid
8	Unscrew screws (6)
9	Pull off actuator right center vent blend flap actuator motor (M16/20)
10	Install in opposite order
11	Perform synchronization of actuator motors	STAR diagnosis, menu point Actuation, synchronization of actuator motors