Checking and machining dimensions for valve seats - AR05.30-P-4510-01AV
TEST VALUES FOR VALVE SEAT RINGS
| Number | Designation | Engine 112.910/ 911 |
Engine 112.912/ 914/915/920/ 921/922/923/ 940/941/942/ 943/944/945/ 946/947/948/ 951/960/961, 113.940/941/94 2/943/944 |
||
|---|---|---|---|---|---|
| BE05.30-P-1009-03C | Inlet valve/exhaust valve seat | Width | mm | 0.8...1.2 | 0.8...1.2 |
| Angle (α) | ∠° | 45(+ 30') | 45(+ 30') | ||
| Correction Angle (β) | ∠° | 35 (±15') | 35 (±15') | ||
| Correction Angle (γ) | ∠° | 58 (±15') | 58 (±15') | ||
TEST VALUES FOR VALVE SEAT RINGS
| Number | Designation | Engine 113.960/ 961/962/963/ 964/965/967/ 968/971/980/ 981/982/984/ 987/988/990/ 991/992/993/ 995 |
Engine 137.970 | ||
|---|---|---|---|---|---|
| BE05.30-P-1009-03C | Inlet valve/exhaust valve seat | Width | mm | 0.60...0.65 | 0.75...0.95 |
| Angle (α) | ∠° | 45 (30') | 45 (30') | ||
| Correction Angle (β) | ∠° | 35 (±15') | 35 (±15') | ||
| Correction Angle (γ) | ∠° | 58 (±15') | 58 (±15') | ||
Shown at exhaust valve seat ring