Remove/install bottom part of oil pan - AR01.45-P-7555IW

ENGINE 112.975, 113.948 /966 in MODEL 220

ENGINE 112.917 in MODELS 211.080 /280

ENGINE 112.954 in MODEL 211.082 /282

ENGINE 113.969 in MODEL 211.083 /283

Shown on model 220 with engine 113

Fig 1: Identifying Oil Pan Remove/Install Components (Shown On Model 220 With Engine 113)

	Remove/install
	Risk of death caused by vehicle slipping or toppling off the lifting platform.	Align vehicle between columns of lifting platform and position four support plates at lifting platform support points specified by vehicle manufacturer.	AS00.00-Z-0010-01A
1	Raise vehicle
2	Detach lower engine compartment paneling	Model 220	AR61.20-P-1105M
		Model 211	AR61.20-P-1105T
3	Drain and collect engine oil	Installation: Replace sealing ring of the oil drain screw.
		Oil drain plug to oil pan	*BA01.45-P-1003-01B
			*BF18.00-P-1001-01H
4.1	Detach right oil line (2) and left oil line (3) of automatic transmission from oil pan bottom section (1)	Model 220
		Bolt, oil pan bottom section to oil pan top section	*BA01.45-P-1005-01B
4.2	Unscrew two bolts for automatic transmission oil line at oil pan	Model 211
5	Detach high pressure line (4) for rack and pinion steering from oil pan bottom section (1) and tie up	Model 220
		Bolt, oil pan bottom section to oil pan top section Model 211	*BA01.45-P-1005-01B
		Bolt, high-pressure expansion hose bracket to engine oil pan	*BA46.30-P-1005-01M
6	Detach oil pan bottom section (1)	Installation: Clean sealing surfaces of oil pan top section and from oil pan bottom section (1).
		Bolt, oil pan bottom section to oil pan top section	*BA01.45-P-1005-01B
		Sealant	*BR00.45-Z-1013-01A
7	Install in the reverse order
	Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the running engine	Secure vehicle to prevent it from moving by itself. Wear closed and snug-fitting work clothes. Do not grasp hot or rotating parts.	AS00.00-Z-0005-01A
8	Check engine oil level	Engine 113.969 in model 211 4-MATIC Engine 113.948/966 in model 220 4-MATIC	AR18.00-P-3035-01IW
		Engine 112.917/954 in model 211 4-MATIC Engine 112.975 in model 220 4-MATIC	AR18.00-P-3035-01BM
		Measuring rod	*120589072100 162 of 186
9	Check for leaks with engine running

OIL PAN

Number	Designation			Engines 112.910/911/ 912/913/914/ 915/917/920/ 921/922/923/ 940/941/942/ 943/944/945/ 946/947/949/ 951/954/955/ 960/961/970/ 972/973/976	Engines 113.940/941/ 942/943/944/ 945/946/960/ 961/962/963/ 965/967/968/ 969/980/981/ 982/984/986/ 992/995	Engine 112.916/953/975, 113.948/966
BA01.45-P-1003-01B	Oil drain screw to oil pan	M14	Nm	30	30	30
BA01.45-P-1005-01B	Bolt, oil pan bottom section to oil pan upper section	Thread not pre-tapped	Nm	-	-	14
BA01.45-P-1005-01B	Bolt, oil pan bottom section to oil pan upper section	Thread pre-tapped	Nm	-	-	9

POWER STEERING PUMP

Number	Designation		Model 211 with engines 112, 113
BA46.30-P-1005-01M	Bolt, bracket for high pressure expansion hose to engine oil pan	Nm	10

ENGINE LUBRICATION

Number	Designation			Engine 112 except 112.916/953/975	Engine 112.975	Engine 113.948/966
BF18.00-P-1001-01H	Engine oil	Filling capacity with oil filter	Liters	8.0	8.0	8.0
		Filling capacity without oil filter	Liters	7.5	7.5	7.5
		Specifications for Operating Fluids	Sheet	BB00.40-P-0229-01A	BB00.40-P-0229-01A	BB00.40-P-0229-01A
			Sheet	BB00.40-P-0229-03A	BB00.40-P-0229-03A	BB00.40-P-0229-03A
			Sheet	BB00.40-P-0229-05A	BB00.40-P-0229-05A	BB00.40-P-0229-05A

ENGINE LUBRICATION

Number	Designation			Engine 113.940/941/ 942/943/960/ 961/962/967/ 969/982
BF18.00-P-1001-01H	Engine oil	Filling capacity with oil filter	Liters	8.0
		Filling capacity without oil filter	Liters	-
		Specifications for Operating Fluids	Sheet	BB00.40-P-0229-01A
			Sheet	BB00.40-P-0229-03A
			Sheet	BB00.40-P-0229-05A

Fig 2: Identifying Dipstick (120 589 07 21 00)

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1013-01A	Sealant	A 003 989 98 20