Removing and installing trailer recognition control module - AR31.19-P-1300I
MODEL 215, 220 with CODE (550) Trailer coupling
Shown on model 220
Fig 1: Identifying Trailer Recognition Control Module Remove/Install Components - Shown On Model 220
| Removal, installation | |||
| 1 | Connect quiescent current retention unit | AR54.10-P-1030-07I | |
| 2 | Disconnect ground lead from battery | AR54.10-P-0003I | |
| 3 | Remove paneling in trunk | AR68.30-P-4600M | |
| 4 | Unscrew screws (1) and remove trailer recognition control module (N28/1) | ||
| 5 | Release and remove connectors (2) on trailer recognition control module | ||
| 6 | Install in opposite order |