Switching on/off rear reading lamps, function - GF82.20-P-2018S

MODEL 220 

The reading lamps (E15/10e1, E15/11e1) are located in the rear dome lamps (E15/10, E15/11).

Switching on the reading lamps 

The reading lamps (E15/10e1, E15/11e1) can be switched on by actuating the switch in the middle of the associated dome lamp.

Switching off the reading lamps 

• by actuating the switch or
• automatically after 30 minutes when no signals are received on the bus

Power supply to reading lamps in rear 

The reading lamps are supplied with power via a +12 volt output of the overhead control panel control module (N70). The overhead control panel switches off this voltage after 30 minutes when no signals are received.