Side light actuation function - GF82.10-P-3000A

MODELS 215.###, 220.02# /06# /07# /12# /16# /17# 1# 

Fig 1: Side Light Actuation Function Diagram

Operating procedure 

1. Exterior lamp switch (S1) is set to parking lights position and notifies the left front SAM control module (N10/6) of "Parking lights ON"  .
2. The left front SAM control module actuates the standing and parking lamp (E1e3) in the left-hand lamp unit and simultaneously sends the "Parking lights ON"  signal over the databus (1) the
   • instrument cluster (A1),
   • right front SAM control module (N10/7) and the
   • rear SAM control module (N10/8).
3. The right front SAM control module (N10/7) actuates the standing and parking lamp (E2e3) in the right-hand lamp unit.
4. The rear SAM control module (N10/8) actuates the
   • outer tail and parking lamp in the left and right-hand tail and parking lamps (E3e2 and E4e2),
   • inner tail lamp in the left and right-hand auxiliary tail lamps (E3e8 and E4e8),

     and the

   • left and right license plate light (E19/1 and E19/2).
5. For trailer couplings the "Parking light ON"  signal is sent over the databus (1) to the trailer recognition control module (N28/1) and current for the trailer's tail lamps and license plate lamps switched to the trailer hitch socket, 13-pin (X58).

   Actuating the instrument cluster (A1) with the "Parking lights ON" signal triggers an acoustic warning signal if the electronic key has been removed and the driver's door is open.