Remove/install belt buckle (front seat) - AR91.40-P-1515P

MODEL 203 

Fig 1: Identifying Belt Buckle (Front Seat) Remove/Install Components

	Remove/install
1	Remove front seat		AR91.10-P-1000P
2	Remove screws (4).
3	Open seat contacting strip	At left front seat connector block (X55/3), right front seat connector block (X55/4)
4	Take out connector (5)
5	Uncover line (3)
6	Unscrew bolt (2)	Screw on front belt buckle	*BA91.40-P-1003-01A
		Torx bit set	Figure
7	Remove belt buckle (1)
8	Install in the reverse order

SEAT BELTS/EMERGENCY TENSIONING RETRACTORS

Number	Designation		Model 203
BA91.40-P-1003-01A	Screw/nut on front seat belt buckle	NM	30

Fig 2: Identifying Torx Bit Set (000 589 01 10 00)