Converting rear bumper - AZ88.00-P-0001-03K

Preparation 

1. Remove bumper.
2. Remove cross member (1) and inner section (2)
3. Remove impact damper (3).
4. Remove side mounts (4).
5. Remove upper rails (5).
6. Remove Parktronic wiring harness (6).
7. Remove moldings (7).
8. Remove towing bracket cover (8).
   Fig 1: Converting Rear Bumper Components - Preparation

   

Assembly 

9. Cut off inner section (2) from carrier, see arrow
10. Glue adapter rail (9) to impact damper (3) with double adhesive strip.
11. Reinstall bumper in opposite order.
    Fig 2: Converting Rear Bumper Components - Assembly