Panoramic sliding roof roller blind location/task/design/function - GF68.50-P-4101PC
MODEL 203.7 with CODE (413) panoramic sliding roof
| Sun blind location | The sun blind (D and E) is located in the center bar between the movable and the stationary glass panels. | ||
| Sun blind task | The sun blind provides protection from the sun for vehicle passengers. | ||
| Sun blind design | The sun blind is made of an opaque material and is driven by a DC motor equipped with a thermal circuit breaker. Two Hall sensors are installed at the motor shaft for position measurement. |
||
| Sun blind function | GF68.50-P-4101-01PC |