LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2001 >> C240 Standard >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Axle -- Testing & Repair -- 203 Chassis - 2 Of 2 >> Testing & Repair >> Installing spacer sleeve with bearing washers on both sides on drive pinion - AR35.31-P-0550-26B

Installing spacer sleeve with bearing washers on both sides on drive pinion - AR35.31-P-0550-26B

  1. Fit a bearing washer (48) on both sides of spacer sleeve (44) and slide onto drive pinion.

    IMPORTANT The spacer sleeve (44) and bearing washers (48) should always be replaced with new ones.

    Fig 1: Identifying Spacer Sleeve, Bearing Washer And ABS Gear
    G04636592
scientia non olet · About LEMON Manuals