Connect cylinder leakage testing unit - AR01.00-P-1300-01VA

Fig 1: Identifying Threaded Adapter (272 589 00 91 00)

1. Calibrate cylinder leakage tester (04).

   Cylinder leakage tester, see GOTIS:http://gotis.aftersales.daimlerchrysler.com

2. Screw threaded adapter (06) to high-pressure testing hose (05).
   Fig 2: Identifying Cylinder Leakage Tester, Threaded Adapter & High-Pressure Testing Hose

   
3. Turn threaded adapter (06) with high-pressure testing hose (05) in tapped bore for spark plug.
4. Mount high-pressure testing hose (05) on cylinder leakage tester (04).

Shown on engine 272.963 

Fig 3: Identifying High-Pressure Testing Hose & Cylinder Leakage Tester - Shown On Engine 272.963