Connect compression tester - AR01.10-P-0010-01PR

Fig 1: Identifying Compression Recorder (001 589 76 21 00)

Fig 2: Identifying Electrical Connection Kit (220 589 00 99 00)

Open cover (1) of front backup fuse box (F32).
Connect clamp (3) on compression recorder on terminal (2) of front backup fuse box (F32).
Shown on model 203

Fig 3: Identifying Front Backup Fuse Box, Cover, Clamp & Terminal
Remove cover on fuse box.
Installation: Check the rubber seal in the cover. Replace it if necessary. The cover must be seated in the groove at the rear.
Remove starter relay (N10/1kS) from relay position S.

Fig 4: Identifying Starter Relay
Insert adapter line (6) into relay position S.

Fig 5: Identifying Adapter Line
Link adapter cable (6) to the cable of the compression recorder (7).

Fig 6: Identifying Adapter Cable And Compression Recorder