Front passenger side door control unit, task - GF72.29-P-4106-03PP

The following description refers to left-hand drive vehicles. The specifications are analog for right-hand drive vehicles.

The right front door control unit (N69/2) has the following purpose:

Scanning the following switches: 

• Front passenger power window switch (S21/2)
• Right front door ESA [ESV] switch group (with memory) (S92/2) (with code (242) Electrically adjustable front passenger seat with memory)

Reading the following sensors: 

• Right front IR receiver unit (A26/2) (up to 23.4.04)
• Hall sensor signals for right front power window motor (M10/4)
• Hall sensor signals for right electrically adjustable and heated outside mirror (M21/2)

Switching loads via semiconductor switches: 

• Right front power window motor (M10/4)
• Right front door CL [ZV] motor (M14/5)
• Mirror up/down adjustment motor (M21/2m1)
• Mirror in/out adjustment motor (M21/2m2)
• Mirror fold-in motor (M21/2m3) (with code (500) Folding left/right outside mirrors)
• Mirror heater (M21/2r1)
• Right outside mirror turn signal lamp (E6/6)
• Right front door entrance/exit lamp (E17/4) (only model 203.0/2)
• Switch and controls illumination for all switches connected

The right front door control unit (N69/2) is connected with the Controller Area Network bus, class B (interior compartment) (CAN B) to exchange data.