Retrofit wiring harness - AN82.61-P-0001-01PA
- Route the black, 2-pin connector with brown (br) and brown/red (br/rt) line (1) in radio the adapter wiring harness (A2) from radio recess into the left front footwell.
- Route the brown (br) and brown/red (br/rt) line (1) underneath the instrument panel along the other existing lines over to the cockpit voltage distributor (CAN) connector (X30/6) and secure it in place with tie straps.
- Connect the black, 2-pin connector to the cockpit voltage distributor (CAN) connector (X30/6).
Any plug position is OK.