Measure front axle carrier (when removed) - AR40.30-P-0450P

MODEL 203 (except 203.081 /084 /281 /284 /087 /092 /287 /292) 

MODEL 171, 209.3/ 4 

Fig 1: Measuring Front Axle Carrier (1 Of 2)

Fig 2: Measuring Front Axle Carrier (2 Of 2)

	Measure
1	Set up Celette straightening bench modular members	See set-up diagram for Celette straightening bench.
2	Install and secure checking fixtures, in the mounting bores of the Celette straightening bench	We recommend measuring the front axle carrier on the vehicle concerned before and after work on the straightening bench.
3	Place front axle carrier assembly (with frontaxle half) or as separate part (as shown) rotated through 180° onto the test fixture	The adjuster pins (arrows) on the modular member must be inserted into the reference bores in the front axle carrier.	*BE40.30-P-1001-08A
4	Install in the reverse order