Remove/install poly-V-belt guide pulley - AR13.21-P-3350QB

ENGINE 272.920 in MODELS 203.052 /252 /752 

ENGINE 272.940 in MODELS 203.054 /254, 209.354 /454 

ENGINE 272.960 in MODELS 203.056 /256 /756, 209.356 /456 

ENGINE 272.970 in MODELS 203.087 /287 

ENGINE 272.941 in MODELS 203.092 /292 

ENGINE 273 in MODEL 209 

Fig 1: Identifying Poly-V-Belt Guide Pulley Remove/Install Components

	Remove/install
	Risk of injury  caused by fingers being pinched or crushed  when removing, installing or aligning hoods, doors, trunk lids, tailgates or sliding roof.	Keep body parts and limbs well clear of moving parts.	AS00.00-Z-0011-01A
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
1	Open engine hood and raise to vertical position	Model 203	AR88.40-P-1000P
		Model 209	AR88.40-P-1000Q
2	Remove front engine cover	Pull front engine cover upward and out of mountings.
3	Remove poly-V-belt		AR13.22-P-1202QB
4	Lever off covers (1b, 2b)
5	Remove bolts (1a, 2a)		*BA20.10-P-1004-01U
6	Remove guide pulleys (1, 2)
7	Install in the reverse order

COOLANT PUMP, COOLANT THERMOSTAT