ME-SFI idle speed control/electronic accelerator-Check electronics - AD07.61-P-6002D
ENGINES 111.921 /942 as of 1.9.98, 111.943, 111.944 as of 1.8.96, 111.946 as of 1.6.98, 111.947 /973, 111.975 as of 1.8.96
ENGINE 111.945 in MODELS 208.335 /435 as of 1.6.98, 202.020 /080 as of 1.9.98
ENGINE 111.974 with CODE (494a) USA version with CODE (807) Model year 1997 with CODE (808) Model year 1998
| Hazard from contact with parts conducting high voltages. | Do not touch parts which conduct high voltages. Persons who wear electronic implants (e.g. heart pacemakers) must not carry out work on the ignition system. | AS15.10-Z-0001-01A | |
| Lethal Hazard from being drawn into rotating vehicle parts | Do not reach into rotating parts. Wear closed and close-fitting work clothes. Secure area of rotating vehicle components against unauthorized access. |
AS00.00-Z-0004-01A | |
| Risk of explosion from fuel igniting, risk of poisoning from inhaling and swallowing fuel as well as risk of injury to eyes and skin from contact with fuel. | No fire, sparks, naked flames or smoking. Pour fuels only into suitable and appropriately marked containers. Wear protective clothing when handling fuel. |
AS47.00-Z-0001-01A | |
| Notes on avoiding damage to ignition system | Engines 104, 111, 112, 113, 119, 120 with ME-SFI fuel injection and ignition system | AH15.10-P-0002-01D | |
| ME-SFI fuel injection and ignition system diagnosis previous knowledge | AD07.61-P-2000D | ||
| Connection and use of testing equipment | AD00.00-P-1000AZ | ||
| Connect hand-held-tester (HHT) and read out fault memory | AD00.00-P-2000-03A | ||
| Remove center connector first when removing connectors from ME-SFI control module, and plug in center connector D last when reconnecting. | |||
| Measuring equipment/test connection column: The numbers in brackets such as => 1.0 (2A) mean: A = Connector A in wiring diagram 2 = Socket 2 in wiring diagram |
|||
| a | Ignition: OFF | ||
| b | Connect test wiring harness with socket box to ME-SFI control module (N3/10) in accordance with connection plan | AD07.61-P-2000-01A | |
| Inspecting | |||
| 1 | Pedal value sensor signal 1 - Check electronics - ME-SFI idle speed control/electronic accelerator | AD07.61-P-6002-08A | |
| 2 | Pedal value sensor signal 2 - Check electronics - ME-SFI idle speed control/electronic accelerator | AD07.61-P-6002-09A | |
| 3 | Throttle valve actuator signal - Check electronics ME- SFI idle speed control/electronic accelerator | AD07.61-P-6002-03B | |
| 4 | Throttle valve actuator actuation - Check electronics - ME-SFI idle speed control/electronic accelerator | AD07.61-P-6002-04A | |
| 5 | P/N detection - Check electronics - ME-SFI idle speed control/electronic accelerator | with automatic transmission | AD07.61-P-6002-05D |
| 6 | Clutch pedal switch - Check electronics - ME-SFI idle speed control/electronic accelerator | with manual transmission | AD07.61-P-6002-06A |
| 7 | Reverse lamp switch - Check electronics - MESFI idle speed control/electronic accelerator | with manual transmission | AD07.61-P-6002-07A |