Remove/install wide band silencer - AR09.41-P-6825T

ENGINE 271.940 in MODEL 203.042 /242 /742, 209.342 /442 

ENGINE 271.941 in MODEL 211.042 /242 

ENGINE 271.946 in MODEL 203.046 /246 /746 

ENGINE 271.948 in MODEL 203.040 /240 /740 

ENGINE 271.942 in MODEL 209.343, 203.043 /243 /743 

ENGINE 271.921 in MODEL 203.730 

ENGINE 271.955 in MODEL 209.341 /441 

ENGINE 271.956 in MODEL 211.041 /241 

Fig 1: Identifying Intake Air Duct

Fig 2: Identifying Wide Band Silencer Remove/Install Components

	Remove/install
1	Open engine hood	Model 203	AR88.40-P-1000P
		Model 209	AR88.40-P-1000Q
		Model 211	AR88.40-P-1000T
2	Remove intake air duct (6)
3	Slacken hose clamp from hose (1)
4	Detach hose (1) from wideband silencer (5)
5	Slacken charge air hose (2) at wide band silencer (5)
6	Slacken hose clamp at connection piece (3) to pressure damper	Installation:  Check hose clamp on connection piece (3) to pressure damper for damage, replace if necessary.
7	Remove bolts (4)		*BA09.41-P-1003-02A
8	Remove wide band silencer (5)
9	Install in the reverse order

CHARGE AIR DUCT