Separate wheelhouse on fender side - AR62.20-P-1200-12P
COMMERCIALLY AVAILABLE TOOLS
| Number | Designation |
|---|---|
| WH58.30-Z-1002-01A | Ball cutter, dia. 12 mm |
| WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm |
WORKSHOP EQUIPMENT
| WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
| WE58.40-Z-1002-03A | Straight grinder (electric/pneumatic) |
Shown on model 203.0
- Expose spot welds (areas H, I, J, K and L).
- Cut spot welds out with
spot weld milling cutter (areas J and K).
Spot weld (arrow) not visible, must be felt.
- Cut spot welds out with
spherical milling cutter (areas H, I and L).