Panoramic sliding roof - clean and lubricate guide mechanism - AP77.20-P-7732PB

MODEL 203.7 with CODE (413) Panoramic glass roof with top sliding roof 

MODEL 211.0 with CODE (413) Panoramic glass roof with top sliding roof 

Fig 1: Identifying Outer Guide Rail

Fig 2: Identifying Release Lever And Cover Connection

Fig 3: Identifying Outer Duct At Bottom

Fig 4: Identifying Inner Upper Duct

Fig 5: Identifying Gate

Fig 6: Identifying Wind Deflector Pivot Arm

	Cleaning and lubricating
1	Lubricate outer guide rail (1)	Drip one drop lubricant each into guide rail at points marked with arrow.
		Special sliding roof anti-friction agent	*BR00.45-Z-1055-06A
2	Open sliding roof cover	Open only until release lever (2) lowers
3	Clean cover connection (3) with cloth and grease.	Cover connection is indicated by a "U-shape".
		Lubricant	*BR00.45-Z-1004-06A
4	Completely open tilting/sliding roof
5	Clean outer duct at bottom (4) with a cloth, grease contact surface.	See arrows.
		Lubricant	*BR00.45-Z-1004-06A
6	Clean inner duct at top (5) with a cloth, grease contact surface.	See arrows.
		Lubricant	*BR00.45-Z-1004-06A
7	Clean gate (6) with a cloth, grease contact surface.	See arrows.
		Lubricant	*BR00.45-Z-1004-06A
8	Clean wind deflector pivot arm (7) with a cloth and grease.	See cross-hatch pattern.
		Lubricant	*BR00.45-Z-1004-06A
9	Check tilting/sliding roof for proper function
10	Remove excess lubricant