Remove/install radiator paneling - AR88.40-P-4001AC

MODEL 203.076/ 276 

Fig 1: Identifying Radiator Paneling Remove/Install Components (Model 203.076/ 276)

	Remove
	Risk of injury  to fingers being jammed or pinched  when Remove/install or aligning hoods, doors, trunk lid/tailgate or sliding roof.	When moving components, ensure that no body parts or limbs are within the operating range of moving parts.	AS00.00-Z-0011-01A
1	Open engine hood		AR88.40-P-1000P
2	Remove bolts (4).
3	Release radiator paneling bottom section (2)	Push catch lugs (5) upward using a suitable tool.
4	Press radiator paneling bottom section (2) toward rear in the lower area and remove
5	Loosen plastic nuts (3) on upper section of radiator paneling (1)	It is not necessary to unscrew the plastic nuts (3) completely
6	Remove radiator paneling top section (1) toward front
	Install
7	Position radiator paneling bottom section (2) and press toward front	Radiator paneling bottom section (2) should arrest audibly
8	Screw in bolts (4)
9	Insert radiator paneling top section (1) into engine hood	Align radiator paneling top section (1) on hood contour
10	Tighten plastic nuts (3) on radiator paneling top section (1)
11	Close engine hood		AR88.40-P-1000P