Brake Assist (BAS) - checking electrical system - AD42.31-P-6000A: Notes

MODEL 129 

MODEL 140 

MODEL 170 

MODEL 202 except CODE (472a) Electronic Stability Program (ESP) 

MODEL 208 except CODE (472a) Electronic Stability Program (ESP) 

MODEL 210 

MODEL 210 with ENGINE 112, 113, 606 except CODE (472a) Electronic Stability Program (ESP) 

	Brake Assist (BAS), location of components		GF42.31-P-0001-02A
	Brake Assist (BAS) diagnosis, advanced information		AD42.31-P-2000A
	Connect socket box with BAS test wiring harness		AD42.31-P-2000-01A
	Assignment of coupling for BAS control module		AD42.31-P-2000-02A
	BAS diagnosis tools		AD42.31-P-2000-03A
	BAS control module versions		AD42.31-P-2000-04A
	Ignition: OFF
	Remove BAS control module (N48)
	Testing
1	Voltage, terminal 87, testing electrical system, BAS		AD42.31-P-6000-01A
2	Voltage, terminal 30, testing electrical system, BAS		AD42.31-P-6000-02A
3	Diagnosis output, testing electrical system of BAS		AD42.31-P-6000-03A
4	BAS solenoid valve, testing electrical system of BAS		AD42.31-P-6000-04A
5	BAS diaphragm travel sensor, testing electrical system of BAS		AD42.31-P-6000-06A