  |
Remove/Install |
|
|
| 1 |
Move driver seat as far upwards as possible |
|
|
| 2 |
Unclip cap (2) from trim (1) using mounting wedge (7) |
|
|
| 3 |
Remove spring washer (3) |
 Installation:
Replace damaged spring washer. |
|
| 4 |
Unscrew bolt (4) and unclip and remove upper trim (1) |
 |
Fig 5 |
| 5.1 |
Remove control valve (6) |
|
AR91.25-P-1440N |
| 5.2 |
Remove control switch |
With multicontour seat. |
AR91.25-P-1760M |
| 6 |
Detach flap (9) from right and left stowage compartment (see arrows) and remove |
|
|
| 7 |
Lift out left and right stowage compartment (18) with mounting wedge (19) |
Do not damage stowage compartment.
Installation:
Guides in stowage compartment must be inserted into recesses in seat frame (arrows). |
Fig 5 |
| 8 |
Unscrew screws (8) (4 screws) |
|
Fig 5 |
| 9 |
Remove trim (5) in direction of arrow |
|
|
| 10 |
Detach paneling (17) |
|
|
| 11 |
Push clamp (12) out of bracket (13) and remove trim (10) from retaining clamps (11) in direction of arrow |
|
|
| 12 |
Remove seat |
|
AR91.10-P-1000N |
| 13 |
Unscrew seat belt buckle screw (14) and screws (15) and remove trim (16) |
Screw of front seat belt buckle. |
*BA91.40-P-1003-01A |
| 14 |
Install in the reverse order |
|
|