LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2000 >> S500 >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Electrical System -- Basic Knowledge -- 215 & 220 Chassis - 2 Of 2 >> Basic Knowledge >> TELE AID switch-on/switch-off characteristics, function - GF82.95-P-2000 >> TELE AID switch-on/switch-off characteristics, function - GF82.95-P-2000P

TELE AID switch-on/switch-off characteristics, function - GF82.95-P-2000P

MODELS 203, 210, 220 up to 31.8.03 with CODE (855) TELE AID with CODE (930) Taxi emergency call 

MODELS 208.3, 215 up to 31.8.03 with CODE (855) TELE AID 

TELE AID switch-on characteristics emergency call 

The TELE AID emergency call system is switched on by turning the key in the starter switch to position 1 or 2. The switch-on procedure is indicated by the indicator lamp flashing (4 sec.) in the SOS push-button switch (S93/3). Moreover, the D2B telephone and TELE AID transmitter/receiver (A35/17) waits for a ready confirmation from the restraint system control unit (N2/7). The system is operational as soon as the ready confirmation is received. If the system is not authorized an error message appears in the instrument cluster (A1), the system is not operational and the indicator lamp in the SOS push-button (S93/3) illuminates.

TELE AID switch-on characteristics telediagnosis 

The TELE AID telediagnosis system is always ready for operation, even when the key in the starter switch is in the 0 position, and the telediagnosis push-button switch on the telephone handset (A34) has been pressed correspondingly. The telephone must be switched on (stand-by mode) and the TELE AID telediagnosis system must be authorized.

If the system is not authorized an error message appears in the instrument cluster (A1) and the system is not operational.

TELE AID switch-off characteristics emergency call 

IMPORTANT The telephone system can be set to power-down in order to continue a telephone conversation for a certain time in spite of " Circuit 15R: OFF  ".

TELE AID switch-off characteristics telediagnosis 

When the telephone is switched off TELE AID telediagnosis is deactivated.

  TELE AID block diagram   GF82.95-P-0001-02P 
  Authorization, function   GF82.95-P-2001P 
  Status indicator (indicator lamp), function for TELE AID emergency call GF82.95-P-2002P 
  Transmitter/receiver unit, location/task/design/function for telephone and TELE AID GF82.95-P-4300A 
  TELE AID push-button, location/task/design/function for TELE AID emergency call GF82.95-P-4101A 
    for TELE AID telediagnosis GF82.95-P-4101P