Station list, function - GF82.70-P-3002M

MODELS 215.3, 220.0 /1 as of 1.9.03 with CODE (813) Voice control system (VCS) 

Function 

The voice control system (VCS) allows the user to create a list of stations. Stations selected frequently can be stored here together with freely selectable names or the proper station name. 10 entries can be stored.

To create or expand the personal list of stations after switching on the operating unit and activating the VCS with the VCS switch (S93/2), the user has to say the editing command "store station".

After saying the editing command, the user is requested by the VCS to enter a station name.

"Please say the name".

If this name has been entered by the user, the VCS requests the user to say the name again as confirmation. If a different name is given when the name is entered the second time (confirmation), the VCS voice output "Please say again" can be heard. If the user then says the name mentioned first, the VCS requests the user to repeat it again. The system stores the station list entry (name and associated station) in the station list only when the associated name and its repetition are identical.

The system voice output then indicates "Station stored".

Calling up station list entries 

The VCS user can use the editing command "Read list of stations" to have the complete list of stations read out. In doing so, the user can select a certain station name in order to set a new station. Selection is accomplished by actuating the VCS switch (S93/2).

Selecting station from station list 

The user can use the editing command "Select station" to select a station from the list of stations. After this editing command, the VCS asks the user: "Please say name" for this station. If the user says the name specified previously while storing the station, then the voice control system VCS switches to the desired station after the user has repeated the station name.

Deleting individual entries from the station list 

After activating the VCS using the VCS switch (S93/2) the user can use the editing command "Delete station" to delete an individual entry in the list of stations. The VCS then requests that the name of the station to be deleted is stated. After entry of the station name by the user, he/she is asked, if he/she really wants to delete the name. If the user answers "Yes", the specified station name is deleted from the station list, the message "Station deleted" being displayed. If the user answers "No" or if too much time elapses, the deletion process is aborted and the station name is retained. Any other word spoken by the user terminates the dialog with the VCS.

Delete entire station list 

After activating the VCS using the VCS switch (S93/2) the user can use the editing command "Delete station list" to delete all entries from the list of stations. The editing command is followed by a VCS voice output, asking whether the list of stations really should be deleted. If the user answers with "Yes", then he/she is asked by a voice output: "Are you sure?". If the user answers this question with "Yes", all station list entries are deleted. If the user answers with "No", the VCS starts to read out the station list entries.

While the station list is being read out, the user can select a station to be deleted by activating the VCS switch (S93/2). The selected station is then repeated by the VCS. The user is then asked, if he/she really wants to delete the selected station. If the user answers "Yes", the specified station is deleted from the station list. If the user answers "No", the system continues reading the station list entries aloud. Any other word terminates dialog with the VCS. The user can interrupt the dialog with the VCS at any time by activating the VCS switch (S93/2).

	Voice control system switch, location/task		GF82.70-P-4100M
	Hands-free microphone, location/task		GF82.70-P-4102M
	Hands-free system loudspeaker, location/task		GF82.70-P-4103M
	Voice control system control unit, location/ task		GF82.70-P-4113M