Emergency call telegram generation, function - GF82.95-P-2004A
MODEL 129, 202, 208.3, 210 as of 1.6.98, 215, 220 with CODE (347) TELE AID emergency call system (D2B)
MODEL 140, 210 up to 31.5.98 with CODE (348) TELE AID emergency call system
MODEL 140, 202, 210, 220 with CODE (930) Taxi emergency call
After an emergency call is triggered the emergency call system control module (TELE AID, A35/8) automatically generates an emergency call telegram. It includes the following information:
- Vehicle location: Longitude and latitude
- Type of emergency call actuation Automatically or manually with the TELE AID pushbutton switch (S93/3) or the emergency call actuation button (S62/6) (only with taxi emergency call)
- Crash parameter from emergency tensioning retractor control module with airbag (AB, N2/2, except models 215, 220) or restraint system control module (N2/7, only models 215, 220) and from roll-over sensor
- Identification number for identifying vehicle,
- Time of emergency call.
The emergency call telegram is transmitted to the service provider via mobile telephone (D-network) and is automatically decoded there.
In the emergency call system control module (TELE AID, A35/8) up to three generated emergency call telegrams are stored. If already more than three emergency call telegrams are stored the oldest telegram is written over. During a taxi emergency call the current vehicle position is stored every 10 minutes in addition.
| Emergency call actuation, function | GF82.95-P-2003A | ||
| Emergency call telegram transmission, function | GF82.95-P-2005A | ||
| Location finding, function | GF82.95-P-3000A | ||
| Data from airbag control module, function | GF82.95-P-3003A | ||
| TELE AID control module, location/purpose/design/function | GF82.95-P-4100A | ||
| TELE AID emergency call pushbutton switch, location/purpose/design/function | GF82.95-P-4101A | ||
| Emergency alarm system actuation button, location/purpose/design/function | Model 140 except 140.063/07, 202, 210, 220 with code 930 | GF82.25-P-4100A |