Remove/Install Divert Air Switchover Valve - Ar09.40-P-3000M

Engine 275 In Model 215, 216, 220, 221, 230 

Engine 285 In Model 240 

Fig 1: Identifying Divert Air Switchover Valve Remove/Install Components

	Remove/install
1	Remove right air filter housing.	Model 215, 216, 220, 221, 230	AR09.10-P-1150LA
		Model 240	AR09.10-P-1150H
2	Dismount right charge air cooler from engine and connect with connected coolant hoses to engine hood	Do not open low temperature circuit.	AR09.41-P-6817HH
3	Remove pneumatic line (1) on divert air switchover valve (Y101)	Installation:  Check pneumatic lines (1) and hose clamps for wear and damage; replace if required.
4	Disconnect the electrical plug connector (2) on the divert air switchover valve (Y101)
5	Lift locking detent (4) and detach divert air switchover valve (Y101) in direction of travel from bracket (3)
6	Install in the reverse order