Check quiescent current - AR54.10-P-1030-03I

Fig 1: Identifying Electrical Connection Set (201 589 00 99 00)

Observe the limits of the multimeter connected for current measurements. When the central locking system operates, a current of about 20 A flows  .

Do not activate any other electrical components during the test otherwise observe a renewed run-on time of about 20 minutes.

1. Lock the vehicle and wait for approx. 20 minutes (run-on time for electronic components): ↓

   Display ≤0.050 A  = specified value achieved: ↓

   Carry out procedure 2.

2. Lock the vehicle and wait for approx. 20 minutes (run-on time for electronic components): ↓

   Display ≤0.050 A = specified value achieved: ↓

   Carry out procedure.

Display >0.050 A  : ↓ Note value displayed and determine circuit with increased quiescent current consumption.