Malfunction in COMAND operating and display system - AF82.85-P-6000J: Notes

MODEL 203, 208, 210, 215, 220 with CODE (352) COMAND operating and display system

MODIFICATION NOTES

11.1.05

No longer send in COMAND with CD, replace

Op. step 5

Damage code	Cause	Remedy
	Due to the large quantity of data on the navigation CD even slight soiling on navigation CD (e.g. finger prints, etc.) may be sufficient to cause the specified fault pattern	Faults in COMAND operating and display system	AF82.85-P-6000-01A
	Primarily with navigation CD 2000/I version H2 with EXPO guide.	1 Clean navigation CD with water and detergent (1 drop).
		2 Dry navigation CD with dry, lent-free rag from inside toward outside.
		3 Advise customer to avoid finger prints and contamination on navigation CD.
		If complaint is still present: ↓ 4 Replace navigation CD.
		If new navigation CD does not solve problem: ↓ 5 Remove, install, replace COMAND.