Check camber, match with a value in the table - AR40.20-P-0322-02GH
Test values for front axle camber
| Number | Designation | Model 163.113/128/ 136/154/157/ 172/175 | Models 163.174 | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-13D | Camber at vehicle level | 3.0 ° | ∠ ° | - | -0° 24' (±20') |
| 3,2° | ∠ ° | - | -0° 24'(±20') | ||
| 3,4° | ∠ ° | - | -0° 25'(±20') | ||
| 3,6° | ∠ ° | - | -0° 26'(±20') | ||
| 3,8° | ∠ ° | - | -0° 26'(±20') | ||
| 4,0° | ∠ ° | - | -0° 27'(±20') | ||
| 4,2° | ∠ ° | - | -0° 28'(±20') | ||
| 4,4° | ∠ ° | - | -0° 29'(±20') | ||
| 4,6° | ∠ ° | - | -0° 29'(±20') | ||
| 4,8° | ∠ ° | - | -0° 30'(±20') | ||
| 5,0° | ∠ ° | - | -0° 31'(±20') | ||
| BE40.20-P-1002-13D | Camber at vehicle level | 5,4° | ∠ ° | -0° 33' (±20') | - |
| 5.6° | ∠ ° | -0° 34'(±20') | - | ||
| 5.8° | ∠ ° | - 0° 35' (±20') | - | ||
| 6,0° | ∠ ° | - 0° 36'(±20') | - | ||
| 6,2° | ∠ ° | -0° 37'(±20') | - | ||
| 6,4° | ∠ ° | -0° 38'(±20') | - | ||
| 6,6° | ∠ ° | -0° 39'(±20') | - | ||
| 6,8° | ∠ ° | -0° 40'(±20') | - | ||
| 7,0° | ∠ ° | - 0° 41'(±20') | - | ||
| 7,2° | ∠ ° | - 0° 42'(±20') | - | ||
| BE40.20-P-1003-13D | Permissible difference for front axle camber between right and left side of vehicle ∠ ° | 20' | 20' | ||
Measure front-axle level and take camber value from the table.
The front-axle level value is displayed by the electronic inclinometer in decimal degrees [°].
Example:
Front axle level (6.0°)= camber value (0° 36' ± 30')