Check and adjust front axle toe-in - AR40.20-P-0323GH
MODEL 163
Modification notes
| 27.7.01 |
Value changed from 0° 10'±10' to 0° 20'±10' |
Value changed to BE40.20-P-1001-07A on model 163 |
*BE40.20-P-1001-07A |
 |
Check and adjust |
|
|
| 1 |
Set steering wheel in center position |
to do this, insert the retainer (055). |
Fig 4 |
| 2 |
Check center position of steering gear and steering wheel |
The steering gear is in the center position when the marking line on the cap coincides with the marking notch on the rotary valve (arrows). Adjust steering wheel by max. one tooth if necessary. |
|
| 3 |
Adjust the toe by loosening the jam nut (1 0f) and twisting the tie rods (10) |
Check that the bellows are not twisted after adjusting the toe. |
*BE40.20-P-1001-07A |
 |
*BA46.40-P-1002-01C |
Front axle toe-in test values
| Number |
Designation |
Model 163 |
| BE40.20-P-1001-07A |
Front axle total toe-in |
∠ ° |
0° 20'(±10') |
Track rod
| Number |
Designation |
Model 163 |
| BA46.40-P-1002-01C |
Clamping nut, tie rod to inner tie rod |
Nm |
50 |