Adjusting vehicle level via rear torsion bar spring mount - AR40.20-P-0301-01GH
Test values for vehicle level at front axle
| Number | Designation | Model 163.113/128/136/ 154/157/172/175 | Model 163.174 | |
|---|---|---|---|---|
| BE40.20-P-1001-02G | Vehicle level - front axle | ° | 6.4 (0.7)4.0(0.7) | 4.0 (±0.7) |
| Number | Designation | Model Series 163 | |
|---|---|---|---|
| BA32.20-P-1001-02G | Bolt, retaining bracket to frame | Nm | 100 |
- Remove self-locking bolt (arrow) of retaining bracket on both sides of vehicle frame and detach torsion bar.
- Set vehicle level by turning the bolt (16c) at the rear torsion bar spring mount on the left and right.
- Twist clockwise: Vehicle is raised
- Turn the bolt counterclockwise to lower the vehicle
Do not unscrew the bolt (16c) fully otherwise the torsion bar spring releases suddenly.
The vehicle level must be adjusted evenly on both sides.
If the vehicle level cannot be adjusted using the bolt (16c), check the vehicle frame and crossmember for kinks and bending (visual inspection).