Easy-entry seat will not operate - AF91.12-P-6003A

MODEL 163.154 /172 #A as of 145273, 163.136 /154 /172 #X as of 708319, 163.113 /128 /175 with CODE (847) 3rd seat row

Operation no. of operation texts or standard texts and flat rates

Sector	Op. no.	Operation text	Time	Acc. no.	Code
P	023612	SECURE BOWDEN CABLE FOR EASY-ENTRY RELEASE HANDLE	005 AW/0,4 h	92 139 38	-

Cause	Remedy
Release cable disconnected from eyelets at top of telescoping strut.	1 Slide one piece of shrink-on tubing (1), approximately 25 mm long, onto release cable.
	2 Reattach right end of release cable to eyelet at top of telescoping strut (2).
	3 Position shrink-on tubing (1) over right cable connection to eyelet.
	4 Reattach left end of release cable to eyelet at top of telescoping strut (2).
	5 Position a second piece of shrink-on tubing (3), approximately 25 mm long, over left cable connection eyelet.
	6 Carefully heat tubing until they shrink securely over release cable ends and eyelets of telescoping strut. Do not damage seat cover.
	Hot air gun	*WH58.30-Z-1004-20A
	7 Verify proper function of easy-entry seat.

Fig 1: Identifying Shrink-On Tubing, Telescoping Strut And Shrink-On Tubing

Commercially available tools

Number	Designation
WH58.30-Z-1004-20A	Hot-air gun