Remove/install seat adjustment switch unit on front seat - AR91.29-P-0003GH

MODEL 163.136 /154 #A up to 051499 with CODE (221b) Electrically adjustable driver and passenger seat 

Fig 1: Identifying Seat Adjustment Switch Unit On Front Seat Components

	Remove/install
1	Unscrew screws (3) from the front paneling (2)
2	Pull down the front paneling (2) approx. 1 cm and remove forwards	Remove electrical line out of the clips on the front paneling (2).
3	Disconnect left front seat adjustment switch connector (S22x1) or right front seat adjustment switch connector (S23x1) on front seat frame
4	Raise operating buttons (7) with long wedge from left front seat adjustment switch (S22) or right front seat adjustment switch (S23)	Installation wedge	Figure
5	Unscrew screws (5) from outer paneling (4)
6	Remove outer paneling (4)
7.1	Disconnect seat adjustment connector (X54/1)	Not fitted with memory switch for left electrically adjustable front seat, code 241 or memory switch for right electrically adjustable front seat, code 242a.
8	Unscrew screws (6) from left front seat adjustment switch (S22) or right front seat adjustment switch (S23)
9	Remove left front seat adjustment switch (S22) or right front seat adjustment switch (S23)
10	Install in the reverse order

Fig 2: Identifying Longitudinal Wedge (115 589 03 59 00)