ME-SFI actual value potentiometer in the throttle valve actuator, fault code description - AD07.61-P-4000-48A

1	Fault code	P0120
2	Fault storage Activation of the engine diagnosis (EURO3/4) or CHECK ENGINE (MIL) malfunction indicator lamp	Following the expiry of the test duration and fault Following two consecutive driving cycles with fault
3	Frequency of the test	Continuously
4	Checked signal or status	Actual value potentiometer voltages 1 or 2
5	Fault setting conditions	Fault if voltage is less than 0.275 V or greater than 4.83 V
	Actual value potentiometer 1	Fault if voltage is less than 0.176 V or greater than 4.74 V
	Actual value potentiometer 2