Fuel tank fill level, ME-SFI fault code description - AD07.61-P-4000-64L

		The fuel tank fill level is too low
1	Fault code ( Display on generic scan tool)	P203A (P0460)
2	Fault storage	After expiry of test duration and fault
	Actuation of the indicator lamp	No actuation
	Engine diagnosis (EURO3/4) CHECK ENGINE (MIL)	Following two successive drive cycles with faults
3	Checking frequency	Continuous
4	Checked signal or status	Transmission of CAN message from instrument cluster.
5	Fault setting conditions	Fuel tank fill level too low (fuel reserve warning light ON) CAN message missing or defective
6		If misfires are detected, fuel starvation may be the cause.