Fault code description - ME-SFI - crankshaft position sensor - AD07.61-P-4000-13A
| 1 | Fault code | P0335 |
| 2 | Fault storage | after the end of the test period and faults |
| Activation of malfunction indicator lamp for engine diagnosis (EURO3/4) or CHECK ENGINE (MIL) |
after two successive driving cycles with faults | |
| 3 | Frequency of the test | continuous |
| 4 | Checked signal or status | Crankshaft position sensor signal (counting the teeth on the flywheel) |
| 5 | Fault setting conditions | (60 - 2 teeth) -1 tooth |
| Lower limit | (60 - 2 teeth) + 1 tooth | |
| Upper limit Test duration |
approx. 5 s |