Cruise control switch, ME-SFI fault code description - AD07.61-P-4000-73L
| 1 | Fault code ( |
P2033 (-) |
| 2 | Fault storage | After expiry of test duration and fault |
| Activation of the engine diagnosis indicator lamp (EURO3/4) or CHECK ENGINE (MIL) malfunction indicator lamp |
No activation | |
| 3 | Checking frequency | Continuous |
| 4 | Checked signal or status | Control contact in cruise control switch. |
| 5 | Fault setting conditions | The control contact must switch each time the switch is operated. |
| 6 | The cruise control switch is connected directly to the engine control unit on model 170 only. Otherwise, it is connected at the EIS or steering column module, which convert the switching of the cruise control switch contacts into CAN signals. Also check the EIS fault memory or steering column module. |