CAN fault detection ME - fault code description - AD07.61-P-4000-32LD
| 1 | Fault code ( |
P202F CAN message from ABC control unit (N51/2) missing or faulty (P0600) |
| 2 | Fault storage | After expiry of test duration and fault |
| Activation of the engine diagnosis indicator lamp (EURO3/4) or CHECK ENGINE (MIL) malfunction indicator lamp |
No activation | |
| 3 | Checking frequency | Continuous |
| 4 | Checked signal or status | The information motor speed, intake air temperature and variant coding is exchanged between the engine control unit and ABC control unit. This communication is monitored. |
| Checking duration | Approx. 10 seconds |